Armeg Carbide Drill Bits

Armeg Porcelain Tile Drill Bit - Carbide - 6mm

• Carbide 6mm porcelain tile drill bit (straight shank) + 6mm pro masonry drill bit.
• This Armeg PTC drill bit has diamond-ground tip geometry that bites into tiles, eliminating wander & slip at the start of drilling.
• Armeg porcelain tile drill bits need a constant flow of water at the tip through the entire drilling process. This is best achieved using an Armeg water feed kit (see related products below).
• Can achieve 15-25 holes in grade 5 porcelain, 50+ holes are possible in lesser grades of porcelain. When it has been exhausted in porcelain it can still be used to drill softer tiles.
• Armeg PTC carbide drill bits can also be used in marble, granite, travertine, natural slate, quarry tiles, ceramic tiles, natural stone, limestone, rosemary roof tiles, etc.

Armeg PTC Carbide tile drill bits DEMO VIDEO...

Armeg Porcelain Tile Drill Bit - Carbide - 6.5mm

• Carbide 6.5mm porcelain drill bit (straight shank) + 6.5mm pro masonry drill bit.
• This Armeg PTC carbide drill bit has diamond-ground tip geometry that bites into tiles, eliminating wander & slip at the start of drilling.
• Armeg porcelain tile drills need a constant flow of water at the tip through the entire drilling process. This is best achieved using an Armeg water feed kit (see related products below).
• Can achieve 15-25 holes in grade 5 porcelain, 50+ holes are possible in lesser grades of porcelain. When it has been exhausted in porcelain it can still be used to drill softer tiles.
• Armeg PTC carbide drill bits can also be used in marble, granite, travertine, natural slate, quarry tiles, ceramic tiles, natural stone, limestone, rosemary roof tiles, etc.

Armeg Porcelain Tile Drill Bit - Carbide - 7mm

• Carbide 7mm porcelain tile drill bit (straight shank) + 7mm pro masonry drill bit.
• This Armeg PTC drill bit has diamond-ground tip geometry that bites into tiles, eliminating wander & slip at the start of drilling.
• Armeg porcelain tile drills need a constant flow of water at the tip through the entire drilling process. This is best achieved using an Armeg water feed kit (see related products below).
• Can achieve 15-25 holes in grade 5 porcelain, 50+ holes are possible in lesser grades of porcelain. When it has been exhausted in porcelain it can still be used to drill softer tiles.
• Armeg PTC carbide tile drill bits can also be used in marble, granite, travertine, natural slate, quarry tiles, ceramic tiles, natural stone, limestone, rosemary roof tiles, etc.

Armeg Porcelain Tile Drill Bit - Carbide - 8mm

• IDEAL PILOT DRILL FOR ARMEG DIAMOND CORES!
• Carbide 8mm porcelain drill bit (straight shank) + 8mm pro masonry drill bit.
• This carbide Armeg PTC drill bit has diamond-ground tip geometry that bites into tiles, eliminating wander & slip at the start of drilling.
• Armeg porcelain tile drill bits need a constant flow of water at the tip through the entire drilling process. This is best achieved using an Armeg water feed kit (see related products below).
• Can achieve 15-25 holes in grade 5 porcelain, 50+ holes are possible in lesser grades of porcelain. When it has been exhausted in porcelain it can still be used to drill softer tiles.
• Armeg PTC carbide drill bits can also be used in marble, granite, travertine, natural slate, quarry tiles, ceramic tiles, natural stone, limestone, rosemary roof tiles, etc.
• Ideal as pilot drill for 13-117mm Armeg diamond cores. Produces 8mm pilot holes for the water feed pilot tip, to eliminate crown slippage on start-up.