Porcelain Drills - Long-Life

You are here: Brand Tools Online > Tiling Tools - Rubi > Diamond Tile Drill Bits > Porcelain Drills - Long-Life

Porcelain tile drill bits – professional porcelain tile drilling solutions. Armeg diamond cores provide the lowest cost-per-cut in the industry (1,000+ holes in tough porcelain is not uncommon). Armeg carbide tile drills are easy to use and will drill 15-25 holes in tough porcelain. PLUS: Rubi professional tile drilling kits.

Armeg Carbide Drill Bits

Armeg PTC carbide professional porcelain tile drill bits
Diamond ground tip geometry to ensure non-slip start up
Ideal for drilling in porcelain tiles (including grade 5), marble, granite, travertine, natural slate, quarry tiles, ceramic tiles, natural stone, limestone, rosemary roof tiles, etc
Expect to drill 15-25 holes in tough porcelain tiles
Sizes: 6mm - 8mm
From: £19.79 (for porcelain drill bit and pro masonry bit)
VIDEO: Armeg Carbide porcelain tile drill bits DEMO

Armeg Diamond Cores

Armeg diamond core drill bits - for professional tile drilling
Continuous diamond crowns for fast, efficient cutting and greatly extended service life
Ideal for drilling in porcelain tiles (including grade 5), marble, granite, travertine, natural slate, quarry tiles, ceramic tiles, natural stone, limestone, rosemary roof tiles, etc
Expect to drill hundreds of holes in tough porcelain tiles (1,000+ is not uncommon)
Sizes: 5mm - 58mm
From: £39.49 (for long life diamond core drill bit and pro masonry bit)
VIDEO: Armeg Diamond Core drill bits DEMO - small sizes
VIDEO: Armeg Diamond Core drill bits DEMO - large sizes

Armeg Drill Accessories

Tile drilling accessories for Armeg Carbide and Diamond Core tile drill bit ranges:

Water feed pump kit
Water feed adaptors & clamp
Sticky drive guide pads

Rubi Dry Diamond Drills

NEW! Rubi dry cut diamond tile drill bits - no water required!

For drilling dry into tiles, including porcelain tiles, and stoneware.
For use with an angle grinder (direct connection) or electric drill (adaptor required).
Maximum operating speed 14,000 RPM. For best results apply minimal pressure - let the tool do the work!
Expect to drill 15-20 holes in porcelain tiles if used correctly - around 1 minute per hole.
Available in a great value kit or individual sizes 6mm, 8mm, 20mm & 30mm.

Also available...

	Rubi Professional Tile Drilling Kits Featuring high quality diamond hole saws and drilling guides
	Armeg Tools - Tiling, Plumbing & Electrical Armeg Tools - inc tile nippers, chisels, electrical box sinkers, jaw dropper