Armeg Diamond Cores

You are here: Brand Tools Online > Tiling Tools - Rubi > Diamond Tile Drill Bits > Porcelain Drills - Long-Life > Armeg Diamond Cores

Diamond core drill bits – Armeg PTC diamond cores are capable of cutting hundreds of holes in all grades of porcelain! The Armeg diamond core drill bit range simply offers the most effective professional tile drilling solution around! Armeg Diamond Core Sets - Click Here!

Armeg Diamond Core Drill Bit - 5mm

Ref: AR-PTC050CRM

Price: £39.49 (Ex VAT)

5mm diamond core drill bit + 5mm pro masonry drill bit.
Armeg PTC diamond core drill bits feature thin wall, continuous diamond crowns for fast, efficient cutting and extended life. Not to be confused with short life diamond grit alternatives.
Capable of cutting hundreds of holes in all grades of porcelain tile.
With natural depth stop.
Armeg PTC diamond core bits need a constant flow of water at the tip through the entire drilling process. This is best achieved using an Armeg water feed kit & adaptor. Even if you're not using the water feed, the adaptor is required to fit the drill bit into the drill chuck - see related products below.
Can also be used in marble, granite, travertine, natural slate, quarry tiles, ceramic tiles, natural stone, limestone, etc.

Weight (packaged): 0.140kg

Estimated delivery (working days): 1-2 days

Further info:
STEP-BY-STEP GUIDE to Porcelain Tile Drilling with Armeg

Armeg Water Feed Adaptor (5-10mm Bits)
ONLY £24.99 - SAVE £5! - REQUIRED

Armeg Water Feed Kit
ONLY £17.95 - SAVE £2! - HIGHLY RECOMMENDED

Armeg Sticky Guide Pads (100 Holes)
ONLY £7.99 - DESIRABLE

Armeg Diamond Core Drill Bit - 6mm

Ref: AR-PTC060CRM

Price: £39.49 (Ex VAT)

BEST SELLING SIZE! ULTRA LONG-LIFE!
6mm diamond core drill bit + 6mm pro masonry drill bit.
Armeg PTC diamond core drill bits feature thin wall, continuous diamond crowns for fast, efficient cutting and extended life. Not to be confused with short life diamond grit alternatives.
Capable of cutting hundreds of holes in all grades of porcelain tile.
With natural depth stop.
Armeg PTC diamond core bits need a constant flow of water at the tip through the entire drilling process. This is best achieved using an Armeg water feed kit & adaptor. Even if you're not using the water feed, the adaptor is required to fit the drill bit into the drill chuck - see related products below.
Can also be used in marble, granite, travertine, natural slate, quarry tiles, ceramic tiles, natural stone, limestone, etc.

Weight

Estimated delivery (working days): 1-2 days

Further info:

STEP-BY-STEP GUIDE to Porcelain Tile Drilling with Armeg

Armeg Water Feed Adaptor (5-10mm Bits)
ONLY £24.99 - SAVE £5! - REQUIRED

Armeg Water Feed Kit
ONLY £17.95 - SAVE £2! - HIGHLY RECOMMENDED

Armeg Sticky Guide Pads (100 Holes)
ONLY £7.99 - DESIRABLE

Customer Reviews

Excellent tool This tool does everything expected of it and does it easily. -

Armeg Diamond Core Drill Bit - 6.5mm

Ref: AR-PTC065CRM

Price: £41.79 (Ex VAT)

6.5mm diamond core bit + 6.5mm pro masonry drill bit.
Armeg PTC diamond core drill bits feature thin wall, continuous diamond crowns for fast, efficient cutting and extended life. Not to be confused with short life diamond grit alternatives.
Capable of cutting hundreds of holes in all grades of porcelain tile.
With natural depth stop.
Armeg PTC drill bits need a constant flow of water at the tip through the entire drilling process. This is best achieved using an Armeg water feed kit & adaptor. Even if you're not using the water feed, the adaptor is required to fit the drill bit into the drill chuck - see related products below.
Can also be used in marble, granite, travertine, natural slate, quarry tiles, ceramic tiles, natural stone, limestone, etc.

Armeg Diamond Core Drill Bit 6.5mm Video

Weight (packaged): 0.17kg

Estimated delivery (working days): 1-2 days

Further info:
STEP-BY-STEP GUIDE to Porcelain Tile Drilling with Armeg

Armeg Water Feed Adaptor (5-10mm Bits)
ONLY £24.99 - SAVE £5! - REQUIRED

Armeg Water Feed Kit
ONLY £17.95 - SAVE £2! - HIGHLY RECOMMENDED

Armeg Sticky Guide Pads (100 Holes)
ONLY £7.99 - DESIRABLE

Armeg Diamond Core Drill Bit - 7mm

Ref: AR-PTC070CRM

Price: £41.79 (Ex VAT)

7mm diamond core drill bit + 7mm pro masonry drill bit.
Armeg PTC diamond core drill bits feature thin wall, continuous diamond crowns for fast, efficient cutting and extended life. Not to be confused with short life diamond grit alternatives.
Capable of cutting hundreds of holes in all grades of porcelain tile.
With natural depth stop.
Armeg PTC drill bits need a constant flow of water at the tip through the entire drilling process. This is best achieved using an Armeg water feed kit & adaptor. Even if you're not using the water feed, the adaptor is required to fit the drill bit into the drill chuck - see related products below.
Can also be used in marble, granite, travertine, natural slate, quarry tiles, ceramic tiles, natural stone, limestone, etc.

Weight (packaged): 0.14kg

Estimated delivery (working days):
Sorry, out of stock until mid-March

Further info:
STEP-BY-STEP GUIDE to Porcelain Tile Drilling with Armeg

Armeg Water Feed Adaptor (5-10mm Bits)
ONLY £24.99 - SAVE £5! - REQUIRED

Armeg Water Feed Kit
ONLY £17.95 - SAVE £2! - HIGHLY RECOMMENDED

Armeg Sticky Guide Pads (100 Holes)
ONLY £7.99 - DESIRABLE

Customer Reviews

good clean holes supper fast holes seems exspensive £45-00 a drill but after using the other drills dipped in diamond dust £8-00 for two holes not for me so i tried Armeg drill system will never use any thing elss over Twenty holes may have used 1/2mm of the end the water system is a must you will not regret it M Thorpe plumber - Barnsley

clean accurate holes not possible with covensional used the 7mm cause it is just over size to drill for 5.5 plugs an d just right for brown plugs drills hole not super fast but nice and steady,best to pull out of hole after about 15 to 20 seconds and break the small cetre piece of tlie off left by the core did 8 holes and no sign of drill wear noel - cannock

Armeg Diamond Core Drill Bit - 8mm

Ref: AR-PTC080CRM

Price: £43.99 (Ex VAT)

8mm diamond core drill bit + 8mm pro masonry drill bit.
Armeg PTC diamond core drills feature thin wall, continuous diamond crowns for fast, efficient cutting and extended life. Not to be confused with short life diamond grit alternatives.
Capable of cutting hundreds of holes in all grades of porcelain tile.
With natural depth stop.
Armeg PTC drill bits need a constant flow of water at the tip through the entire drilling process. This is best achieved using an Armeg water feed kit & adaptor. Even if you're not using the water feed, the adaptor is required to fit the drill bit into the drill chuck - see related products below.
Can also be used in marble, granite, travertine, natural slate, quarry tiles, ceramic tiles, natural stone, limestone, etc.
Ideal as pilot drill for 13-117mm PTC diamond cores. Produces 8mm pilot holes for the water feed pilot tip, to eliminate slippage of diamond cores on start-up.

Weight (packaged): 0.16kg

Estimated delivery (working days): 1-2 days

Further info:
STEP-BY-STEP GUIDE to Porcelain Tile Drilling with Armeg

Armeg Water Feed Adaptor (5-10mm Bits)
ONLY £24.99 - SAVE £5! - REQUIRED

Armeg Water Feed Kit
ONLY £17.95 - SAVE £2! - HIGHLY RECOMMENDED

Armeg Sticky Guide Pads (100 Holes)
ONLY £7.99 - DESIRABLE

Armeg Diamond Core Drill Bit - 10mm

Ref: AR-PTC100CRM

Price: £43.99 (Ex VAT)

10mm diamond core drill bit + 10mm pro masonry drill bit.
Armeg PTC diamond core drill bits feature thin wall, continuous diamond crowns for fast, efficient cutting and extended life. Not to be confused with short life diamond grit alternatives.
Capable of cutting hundreds of holes in all grades of porcelain tile.
With natural depth stop.
Armeg PTC drill bits need a constant flow of water at the tip through the entire drilling process. This is best achieved using an Armeg water feed kit & adaptor. Even if you're not using the water feed, the adaptor is required to fit the drill bit into the drill chuck - see related products below.
Can also be used in marble, granite, travertine, natural slate, quarry tiles, ceramic tiles, natural stone, limestone, etc.

Weight (packaged): 0.18kg

Estimated delivery (working days): 1-2 days

Further info:
STEP-BY-STEP GUIDE to Porcelain Tile Drilling with Armeg

Armeg Water Feed Adaptor (5-10mm Bits)
ONLY £24.99 - SAVE £5! - REQUIRED

Armeg Water Feed Kit
ONLY £17.95 - SAVE £2! - HIGHLY RECOMMENDED

Armeg Sticky Guide Pads (100 Holes)
ONLY £7.99 - DESIRABLE

Armeg Diamond Core Drill Bit - 13mm

Ref: AR-PTC13CR

Price: £44.49 (Ex VAT)

Armeg 13mm diamond core drill bit
Armeg PTC diamond drill bits feature thin wall, continuous diamond crowns for fast, efficient cutting and extended life. Not to be confused with short life diamond grit alternatives.
Capable of cutting hundreds of holes in all grades of porcelain tile. Can also be used in marble, granite, travertine, natural slate, quarry tiles, ceramic tiles, natural stone & limestone.
Armeg PTC drill bits need a constant flow of water at the tip through the entire drilling process. This is best achieved using an Armeg water feed kit & adaptor. Even if you're not using the water feed, the adaptor is required to fit the drill bit into the drill chuck - see related products below.
An 8mm pilot hole should first be drilled (see related products below) to enable the correct positioning of the large diamond core. The pilot tip of the water feed adaptor then slots into the pilot hole.

Weight (packaged): 0.17kg

Estimated delivery (working days): 3-7 days

Further info:
STEP-BY-STEP GUIDE to Porcelain Tile Drilling with Armeg

Armeg Water Feed Adaptor (13-117mm)
ONLY £32.99 - SAVE £6! - REQUIRED

Armeg Carbide Pilot Drill 8mm
ONLY £19.99 - SAVE £3! - HIGHLY RECOMMENDED

Armeg Water Feed Kit
ONLY £17.95 - SAVE £2! - HIGHLY RECOMMENDED

Armeg Diamond Core Drill Bit - 19mm

Ref: AR-PTC19CR

Price: £47.79 (Ex VAT)

Armeg 19mm diamond core drill bit
Armeg PTC diamond drill bits feature thin wall, continuous diamond crowns for fast, efficient cutting and extended life. Not to be confused with short life diamond grit alternatives.
Capable of cutting hundreds of holes in all grades of porcelain tile. Can also be used in marble, granite, travertine, natural slate, quarry tiles, ceramic tiles, natural stone & limestone.
Armeg PTC drill bits need a constant flow of water at the tip through the entire drilling process. This is best achieved using an Armeg water feed kit & adaptor. Even if you're not using the water feed, the adaptor is required to fit the drill bit into the drill chuck - see related products below.
An 8mm pilot hole should first be drilled (see related products below) to enable the correct positioning of the large diamond core. The pilot tip of the water feed adaptor then slots into the pilot hole.

Weight (packaged): 0.22kg

Estimated delivery (working days): 1-2 days

Further info:
STEP-BY-STEP GUIDE to Porcelain Tile Drilling with Armeg

Armeg Water Feed Adaptor (13-117mm)
ONLY £32.99 - SAVE £6! - REQUIRED

Armeg Carbide Pilot Drill 8mm
ONLY £19.99 - SAVE £3! - HIGHLY RECOMMENDED

Armeg Water Feed Kit
ONLY £17.95 - SAVE £2! - HIGHLY RECOMMENDED

Armeg Diamond Core Drill Bit - 26mm

Ref: AR-PTC26CR

Price: £54.99 (Ex VAT)

Armeg 26mm diamond core drill bit
Armeg PTC diamond drill bits feature thin wall, continuous diamond crowns for fast, efficient cutting and extended life. Not to be confused with short life diamond grit alternatives.
Capable of cutting hundreds of holes in all grades of porcelain tile. Can also be used in marble, granite, travertine, natural slate, quarry tiles, ceramic tiles, natural stone & limestone.
Armeg PTC drill bits need a constant flow of water at the tip through the entire drilling process. This is best achieved using an Armeg water feed kit & adaptor. Even if you're not using the water feed, the adaptor is required to fit the drill bit into the drill chuck - see related products below.
An 8mm pilot hole should first be drilled (see related products below) to enable the correct positioning of the large diamond core. The pilot tip of the water feed adaptor then slots into the pilot hole.

Weight (packaged): 0.3kg

Estimated delivery (working days): 3-7 days

Further info:
STEP-BY-STEP GUIDE to Porcelain Tile Drilling with Armeg

Armeg Water Feed Adaptor (13-117mm)
ONLY £32.99 - SAVE £6! - REQUIRED

Armeg Carbide Pilot Drill 8mm
ONLY £19.99 - SAVE £3! - HIGHLY RECOMMENDED

Armeg Water Feed Kit
ONLY £17.95 - SAVE £2! - HIGHLY RECOMMENDED

Armeg Diamond Core Drill Bit - 36mm

Ref: AR-PTC36CR

Price: £59.99 (Ex VAT)

Armeg 36mm diamond core drill bit
Armeg PTC diamond drill bits feature thin wall, continuous diamond crowns for fast, efficient cutting and extended life. Not to be confused with short life diamond grit alternatives.
Capable of cutting hundreds of holes in all grades of porcelain tile. Can also be used in marble, granite, travertine, natural slate, quarry tiles, ceramic tiles, natural stone & limestone.
Armeg PTC drill bits need a constant flow of water at the tip through the entire drilling process. This is best achieved using an Armeg water feed kit & adaptor. Even if you're not using the water feed, the adaptor is required to fit the drill bit into the drill chuck - see related products below.
An 8mm pilot hole should first be drilled (see related products below) to enable the correct positioning of the large diamond core. The pilot tip of the water feed adaptor then slots into the pilot hole.

Weight (packaged): 0.32kg

Estimated delivery (working days): 3-7 days

Further info:
STEP-BY-STEP GUIDE to Porcelain Tile Drilling with Armeg

Armeg Water Feed Adaptor (13-117mm)
ONLY £32.99 - SAVE £6! - REQUIRED

Armeg Carbide Pilot Drill 8mm
ONLY £19.99 - SAVE £3! - HIGHLY RECOMMENDED

Armeg Water Feed Kit
ONLY £17.95 - SAVE £2! - HIGHLY RECOMMENDED

Armeg Diamond Core Drill Bit - 44mm

Ref: AR-PTC44CR

Price: £69.99 (Ex VAT)

Armeg 44mm diamond core drill bit
Armeg PTC diamond drill bits feature thin wall, continuous diamond crowns for fast, efficient cutting and extended life. Not to be confused with short life diamond grit alternatives.
Capable of cutting hundreds of holes in all grades of porcelain tile. Can also be used in marble, granite, travertine, natural slate, quarry tiles, ceramic tiles, natural stone & limestone.
Armeg PTC drill bits need a constant flow of water at the tip through the entire drilling process. This is best achieved using an Armeg water feed kit & adaptor. Even if you're not using the water feed, the adaptor is required to fit the drill bit into the drill chuck - see related products below.
An 8mm pilot hole should first be drilled (see related products below) to enable the correct positioning of the large diamond core. The pilot tip of the water feed adaptor then slots into the pilot hole.

Weight (packaged): 0.34kg

Estimated delivery (working days): 3-7 days

Further info:
STEP-BY-STEP GUIDE to Porcelain Tile Drilling with Armeg

Armeg Water Feed Adaptor (13-117mm)
ONLY £32.99 - SAVE £6! - REQUIRED

Armeg Carbide Pilot Drill 8mm
ONLY £19.99 - SAVE £3! - HIGHLY RECOMMENDED

Armeg Water Feed Kit
ONLY £17.95 - SAVE £2! - HIGHLY RECOMMENDED

Armeg Diamond Core Drill Bit - 58mm

Ref: AR-PTC58CR

Price: £84.99 (Ex VAT)

Armeg 58mm diamond core drill bit
Armeg PTC diamond drill bits feature thin wall, continuous diamond crowns for fast, efficient cutting and extended life. Not to be confused with short life diamond grit alternatives.
Capable of cutting hundreds of holes in all grades of porcelain tile. Can also be used in marble, granite, travertine, natural slate, quarry tiles, ceramic tiles, natural stone & limestone.
Armeg PTC drill bits need a constant flow of water at the tip through the entire drilling process. This is best achieved using an Armeg water feed kit & adaptor. Even if you're not using the water feed, the adaptor is required to fit the drill bit into the drill chuck - see related products below.
An 8mm pilot hole should first be drilled (see related products below) to enable the correct positioning of the large diamond core. The pilot tip of the water feed adaptor then slots into the pilot hole.

Weight (packaged): 0.36kg

Estimated delivery (working days): 3-7 days

Further info:
STEP-BY-STEP GUIDE to Porcelain Tile Drilling with Armeg

Armeg Water Feed Adaptor (13-117mm)
ONLY £32.99 - SAVE £6! - REQUIRED

Armeg Carbide Pilot Drill 8mm
ONLY £19.99 - SAVE £3! - HIGHLY RECOMMENDED

Armeg Water Feed Kit
ONLY £17.95 - SAVE £2! - HIGHLY RECOMMENDED

Armeg Diamond Core Drill Bit - 80mm

Ref: AR-PTC80CR

Price: £99.99 (Ex VAT)

Armeg 80mm diamond core drill bit
Armeg PTC diamond drill bits feature thin wall, continuous diamond crowns for fast, efficient cutting and extended life. Not to be confused with short life diamond grit alternatives.
Capable of cutting hundreds of holes in all grades of porcelain tile. Can also be used in marble, granite, travertine, natural slate, quarry tiles, ceramic tiles, natural stone & limestone.
Armeg PTC drill bits need a constant flow of water at the tip through the entire drilling process. This is best achieved using an Armeg water feed kit & adaptor. Even if you're not using the water feed, the adaptor is required to fit the drill bit into the drill chuck - see related products below.
An 8mm pilot hole should first be drilled (see related products below) to enable the correct positioning of the large diamond core. The pilot tip of the water feed adaptor then slots into the pilot hole.

Weight (packaged): 0.390kg

Estimated delivery (working days): 3-7 days

Further info:
STEP-BY-STEP GUIDE to Porcelain Tile Drilling with Armeg

Armeg Water Feed Adaptor (13-117mm)
ONLY £32.99 - SAVE £6! - REQUIRED

Armeg Carbide Pilot Drill 8mm
ONLY £19.99 - SAVE £3! - HIGHLY RECOMMENDED

Armeg Water Feed Kit
ONLY £17.95 - SAVE £2! - HIGHLY RECOMMENDED

Armeg Diamond Core Drill Bit - 117mm

Ref: AR-PTC117CR

Price: £154.99 (Ex VAT)

Armeg 117mm diamond core drill bit
Armeg PTC diamond drill bits feature thin wall, continuous diamond crowns for fast, efficient cutting and extended life. Not to be confused with short life diamond grit alternatives.
Capable of cutting hundreds of holes in all grades of porcelain tile. Can also be used in marble, granite, travertine, natural slate, quarry tiles, ceramic tiles, natural stone & limestone.
Armeg PTC drill bits need a constant flow of water at the tip through the entire drilling process. This is best achieved using an Armeg water feed kit & adaptor. Even if you're not using the water feed, the adaptor is required to fit the drill bit into the drill chuck - see related products below.
An 8mm pilot hole should first be drilled (see related products below) to enable the correct positioning of the large diamond core. The pilot tip of the water feed adaptor then slots into the pilot hole.

Armeg Diamond Core Drill Bit 117mm Video

Weight (packaged): 0.830kg

Estimated delivery (working days): 3-7 days

Further info:
STEP-BY-STEP GUIDE to Porcelain Tile Drilling with Armeg

Armeg Water Feed Adaptor (13-117mm)
ONLY £32.99 - SAVE £6! - REQUIRED

Armeg Carbide Pilot Drill 8mm
ONLY £19.99 - SAVE £3! - HIGHLY RECOMMENDED

Armeg Water Feed Kit
ONLY £17.95 - SAVE £2! - HIGHLY RECOMMENDED

Armeg Diamond Cores Set - for 15mm Copper Pipes

Ref: AR-PTC15CPSET

Price: £79.95 (Ex VAT)

Great Armeg set for drilling 19mm holes in porcelain tiles for 15mm copper pipes. Contains:

19mm diamond core drill bit for 15mm copper pipes.
Armeg PTC carbide pilot drill - 8mm.
Masonry drill bit - 8mm.
Water feed pipe with spray nozzle.
Water feed adaptor.
Water feed clamp.

Also recommended (but not included): Armeg water feed pump - for effective water cooling of the diamond core (see related products below).

Armeg starter sets also available for: 10mm micro bore copper pipes, 22mm copper pipes, 32mm waste pipes, 40mm waste pipes, 52mm waste pipes, shower mixer valves and vents & soil pipes. Please contact us for full details!

Weight (packaged): 1.16kg

Estimated delivery (working days): 1-2 days

Further info:
STEP-BY-STEP GUIDE to Porcelain Tile Drilling with Armeg

Armeg Water Feed Kit
ONLY £17.95 - SAVE £2! - HIGHLY RECOMMENDED

Armeg Diamond Core Bits Set - 6mm, 7mm & 8mm

Ref: AR-PTC3CRMSET

Price: £129.95 (Ex VAT)

BEST KIT FOR DRILLING 100'S OF SMALL HOLES IN PORCELAIN!
Armeg PTC small diameter diamond drill bit set. Featuring Armeg's three most popular diamond drill bit sizes. Contains:

6mm, 7mm & 8mm diamond core drill bits.
6mm, 7mm & 8mm pro masonry drill bits (for drilling fixing holes in substrate behind the tile).
Water feed pipe.
Water feed adaptor.
Drive guides (sticky pads) - pack of 25.
Carry case.
FREE DELIVERY!

Also recommended (but not included): Armeg water feed pump - for effective water cooling of the diamond core (see related products below).

Weight (packaged): 1.2kg

Estimated delivery (working days):
Sorry, out of stock until mid-March

Further info:
STEP-BY-STEP GUIDE to Porcelain Tile Drilling with Armeg

Armeg Water Feed Kit
ONLY £17.95 - SAVE £2! - HIGHLY RECOMMENDED

Armeg Piping Kit - Diamond Core Drill Bits

Ref: AR-PTCSET2

Price: £209.99 (Ex VAT)

BEST KIT FOR DRILLING 100'S OF HOLES FOR COMMON PIPE SIZES!
Contains a great range of diamond hole saws to accomodate common pipe sizes. Includes:

19mm PTC diamond core drill bit (for 15mm pipes).
26mm PTC diamond core drill bit (for 22mm pipes).
36mm PTC diamond core drill bit (for 32mm pipes).
44mm PTC diamond core drill bit (for 40mm pipes).
Water feed pipe with spray nozzle.
Water feed drive adaptor.
Water feed clamp.
FREE & FAST DELIVERY!

Also recommended (but not included): Armeg water feed pump - for effective water cooling of the diamond core. Armeg 8mm carbide pilot drill bit. See related products below...

Weight (packaged): 1.32kg

Estimated delivery (working days): 1-2 days

Further info:
STEP-BY-STEP GUIDE to Porcelain Tile Drilling with Armeg

Armeg Water Feed Kit
ONLY £17.95 - SAVE £2! - HIGHLY RECOMMENDED

Armeg Carbide Pilot Drill 8mm
ONLY £19.99 - SAVE £3! - HIGHLY RECOMMENDED

Armeg Piping & Fixings Kit - Diamond Core Drill Bits

Ref: AR-PTCSET1

Price: £299.95 (Ex VAT)

SPECIAL OFFER - FREE WATER FEED PUMP KIT WORTH £19.95!
COMPLETE KIT FOR DRILLING COMMON PIPE & FIXINGS HOLES!
Contains a great range of diamond cores & carbide drill bits to accomodate common pipe sizes and standard fixings.

19mm PTC diamond core bit (for 15mm pipes).
26mm PTC diamond core bit (for 22mm pipes).
36mm PTC diamond core bit (for 32mm pipes).
44mm PTC diamond core bit (for 40mm pipes).
Armeg PTC fixings set containing 5 carbide drill bits: 5mm, 6mm, 6.5mm, 7mm, 8mm. PLUS 5 professional masonry drill bits in the same sizes.
Water feed pipe with spray nozzle.
Water feed drive adaptor.
Water feed clamp.
PLUS: FREE Water Feed Pump worth £19.95!
FREE & FAST DELIVERY!

Weight (packaged): 2.84kg

Estimated delivery (working days): 1-2 days

Further info:
STEP-BY-STEP GUIDE to Porcelain Tile Drilling with Armeg

FREE Armeg Water Feed Kit - WORTH £19.95

Customer Reviews

Great product It was a little more than others on the market but it comes with everything and does the job with ease Gary - Norwich

You are here: Brand Tools Online > Tiling Tools - Rubi > Diamond Tile Drill Bits > Porcelain Drills - Long-Life > Armeg Diamond Cores