Fluke T130 Digital Voltage & Continuity Tester - With LCD Display & Switchable Load
Fluke’s two-pole voltage and continuity testers are built to work the way you work. They give you the best combination of safety, ease-of-use and fast answers available anywhere.
- Large, clear LCD digital display
- CAT IV 600 V, Cat III 690 V safety rating. Fluke’s family of two-pole voltage testers comply with both regulation HSE GS 38 (tip caps) and IEC EN 61243-3: 2010.
- 4 ways to detect ac/dc voltage: 1. a clear, instantly visible LED indicator, 2. a bright digital display of the measurement value, 3. an audible continuity test and 4. vibration to give tactile feedback (vibration indicator).
- Backlit graduated scale and backlit indicators
- Vibration provides tactile feedback
- Audio on/off for testing in quiet areas
- Low battery indicator
- Detects voltage even with discharged batteries
- Improved probe docking for secure storage
- Phase rotation indicator for 3-phase systems
- RCD functionality: Two-button controls allow you to draw more current from the circuit under test and intentionally trip Residual-Current Devices (RCDs) remotely
- Display Hold
- Built in electric torch
- Single-phase voltage offers fast identification of live conductors
- Push-on probe tips, probe tip protector and storage accessory
- Probe tip protector and storage accessory: Tip protector serves as an extra hand when opening UK electrical safety outlets.
- WearGuard insulation shows damage to test leads
Applicable specification for T130 is highlighted in yellow/bold type below.
|Specification ||T90 ||T110 ||T130 ||T150 |
|Voltage AC/DC ||12V - 690V ||12V - 690V ||6V - 690V ||6V - 690V |
|Continuity ||0 - 400 kΩ |
|Frequency ||0 / 40 - 400 Hz |
|Phase rotation ||N/A ||100 V - 690 V |
|Resistance measurement ||N/A ||N/A ||N/A ||Up to 1999 Ω |
|Response Time (LED indicator) ||< 0.5 s |
|200Ω input impedance ||Current draw 3,5 mA @ 690 V |
Current draw 1,15 mA @ 230 V
|7kΩ input impedance (with load buttons pressed) ||N/A ||Current draw 30 mA @ 230 V |
|Safety rating ||CAT II 690V |
CAT III 600V
|CAT III 690V |
CAT IV 600V
|IP rating ||IP54 ||IP64 ||IP64 ||IP64 |
|Power requirement ||2 x AA batteries |
|Net weight ||180 g (T90) |
280 g (T110. T130, T150)
|Size (length, width, height) ||23 x 6.5 x 3.8 cm (T90) |
26 x 7 x 3.8 cm (T110, T130, T150)
|Warranty ||2 years |
|Country of origin ||Romania |
Condition: NewBrand: FlukeManufacturer's Part Number: 4016961
Availability: InStockUK Shipping Category:
Price Inc VAT: GBP 144.59
FREE Next Work Day Delivery! (£0.00) - UK MainlandWeight
(largest size, packaged): 0.45kg
"No hassle" 14 day returns policy - providing the item has not been used.