Armeg Tile Drilling Accessories

Brand Tools Online | Tiling Tools | Tile Drill Bits | Armeg Tile Drilling Accessories

Armeg tile drilling accessories for use with PTC tile drill bits: water feed pump, adaptors & clamp, piloting/drive guides. Also: Armeg SDS Plus tile removing chisel. Full range of Armeg accessories available on request!

Armeg PTC Water Feed Pump Kit

Ref: AR-PTCWFKIT

Price: £19.95 (Ex VAT)

Armeg PTC water feed pump. Essential when drilling in porcelain to prevent overheating of the tool. Efficiently water-cooled PTC tools will demonstrate a more efficient drilling action and will greatly extend product life.

Water feed adaptor (AR-PTCPAD5-10) required for 5-10mm diamond crowns. Water feed adaptor (AR-PTCPAD) required for 13-117mm diamond crowns (included in diamond drilling sets). No adaptor required for PTC Carbide drill bits but water feed clamp (AR-PTCWFCLAMP) is recommended.

Drill and clamp not included.

Estimated delivery (working days): 1-2 days

More info:
Armeg PTC Water Feed Pump Kit

Armeg Water Feed Adaptor (5-10mm Diamond Crowns)

Ref: AR-PTCPAD5-10

Price: £28.99 (Ex VAT)

Armeg water feed adaptor. Required when drilling in porcelain with Armeg diamond crowns (sizes 5-10mm) to enable connection to the Armeg water feed pump (AR-PTCWFKIT).

Cannot be used with larger sized crowns. Included in small diameter diamond crown set (AR-PTC3CRMSET).

Estimated delivery (working days): 1-2 days

More info:
Armeg Water Feed Adaptor (5-10mm Diamond Crowns)

Armeg Water Feed Adaptor (13-117mm Diamond Crowns)

Ref: AR-PTCPAD

Price: £36.49 (Ex VAT)

Armeg water feed adaptor. Required when drilling in porcelain with Armeg diamond crowns (sizes 13-117mm) to enable connection to the Armeg water feed pump (AR-PTCWFKIT). Featuring pilot tip.

Can also be used with smaller diameter, 5-10mm diamond crowns. This adaptor is included in the large diameter diamond drilling kits (AR-PTC15CPSET, AR-PTCSET1 & AR-PTCSET2).

Estimated delivery (working days): 1-2 days

More info:
Armeg Water Feed Adaptor (13-117mm Diamond Crowns)

Armeg Water Feed Retaining Clamp

Ref: AR-PTCWFCLAMP

Price: £8.99 (Ex VAT)

Recommended when drilling in porcelain with Armeg PTC Carbide drill bits in order to attach the required water feed (using pump AR-PTCWFKIT) to the drill. This allows two hands to be placed on the drill - you no longer have to hold the water feed! This clamp is included in the large diameter diamond drilling kits (AR-PTC15CPSET, AR-PTCSET1 & AR-PTCSET2).

Estimated delivery (working days): 1-2 days

More info:
Armeg Water Feed Retaining Clamp

Armeg PTC Drive Guides (Sticky Pads) - Bag of 25

Ref: AR-PTCMULTIGP25

Price: £2.99 (Ex VAT)

Armeg PTC diamond piloting/drive guides ensure a non-slip start-up for PTC diamond crowns of sizes 5-10mm. These disposable and accurate guides allow for precise positioning of the required hole and can be easily removed from the tile without leaving a sticky mark. Featuring soluble-based adhesive. Tile must be perfectly dry and clean before use. Bag of 25 pads.

Estimated delivery (working days): 1-2 days

More info:
Armeg PTC Drive Guides (Sticky Pads) - Bag of 25

Armeg PTC Drive Guides (Sticky Pads) - Bag of 100

Ref: AR-PTCMULTIGP100

Price: £8.99 (Ex VAT)

Armeg PTC diamond piloting/drive guides ensure a non-slip start-up for PTC diamond crowns of sizes 5-10mm. These disposable and accurate guides allow for precise positioning of the required hole and can be easily removed from the tile without leaving a sticky mark. Featuring soluble-based adhesive. Tile must be perfectly dry and clean before use. Bag of 100 pads.

Estimated delivery (working days): 1-2 days

More info:
Armeg PTC Drive Guides (Sticky Pads) - Bag of 100

Armeg SDS Plus Tile Removing Chisel

Ref: AR-G80SDSTR

Price: £25.99 (Ex VAT)

Armeg tile removing chisel utilises the SDS Plus drill hammer-action to rapidly lift old tiles and supporting adhesive. Replaces the need to use time consuming hand-held hammers and chisels. With cranked shaft that angles the head beneath the tiles. Combination of hammer and chisel action rapidly removes old tiles.

For use with SDS Plus machines with roto stop.

Estimated delivery (working days): 1-2 days

More info:
Armeg SDS Plus Tile Removing Chisel

Brand Tools Online | Tiling Tools | Tile Drill Bits | Armeg Tile Drilling Accessories

Best Sellers