Isolator Valve Wrench
Hexagon End: For tightening or removal of blanking plugs and bleed valve housings. Cranked design keeps wrench away from radiator edge, preventing damage. Full hexagon allows location on shallow fittings. Isolator Grabber: For the retention of isolating valves while union nuts are tightened. Retains the isolating valve by the screw boss instead of using grips.
|
 |
Radiator Wrench
Hex Wrench End: HEX WRENCH for use on fittings with internal hexagon. SQUARE WRENCH for use on bleed valve plugs. Spanner End: Wrench for use on fittings with external square. Wrench allows easy positive location on radiator fittings with an external square.
|
 |
Boiler Wrench
For the tightening or loosening of the hard to access fittings on the underside of modern combi-boilers. Also fits large union nuts. The close proximity of pipe work under modern combi-boilers makes it difficult to get a conventional spanner onto the union nuts and tighten them. The slim design of the Boiler Wrench makes it much easier.
|
 |
Adjustable Wrench - 6" Length
Adjustable wrench will open to 24mm for union nuts. A 24mm wide opening is not usually available on a short, compact adjustable wrench.
|
 |