|
Armeg Diamond Drill Bit Set - for 15mm Copper Pipes
Ref: AR-PTC15CPSET
Great Armeg set for drilling 19mm holes in porcelain tiles for 15mm copper pipes. To be used with the AR-PTCWFKIT water feed pump (see related products below).
Includes:
- 19mm diamond core drill bit for 15mm copper pipes.
- Armeg PTC carbide pilot drill - 8mm.
- Masonry drill bit - 8mm.
- Water feed pipe with spray nozzle.
- Water feed adaptor.
- Water feed clamp.
Armeg starter sets also available for: 10mm micro bore copper pipes, 22mm copper pipes, 32mm waste pipes, 40mm waste pipes, 52mm waste pipes, shower mixer valves and vents & soil pipes. Please contact us for full details!
Features of Armeg PTC diamond tile drill bits...
- Thin wall, continuous diamond crowns for fast, efficient cutting and extended life. Not to be confused with short-life diamond grit alternatives.
- Capable of cutting hundreds of holes in all grades of porcelain.
- Needs a constant flow of water at the tip through the entire drilling process.
- Can also be used in marble, granite, travertine, natural slate, quarry tiles, ceramic tiles, natural stone, limestone, etc.
Frequently Asked Questions...
What speed should the drill bits be used at?
The diamond crowns can be used at any speed up to a maximum of 1500 rpm. Also suitable for use with cordless electric drills.
How quickly should I be able to produce a hole through a porcelain tile?
A hole should be produced through a porcelain tile in seconds rather than minutes. Excessive drilling times are usually due to insufficient pressure being applied through the drilling process or incorrect speed setting on the power tool.
How much pressure should I apply whilst drilling?
Sufficient pressure should be applied to keep the drill bit progressing through the tile (signified by tile dust being visible in the cooling water).
Estimated delivery (working days): 1-2 days
Price:
£79.95
(Ex VAT)
Return to... Porcelain Drill Bits - Armeg Diamond Core
Related products:
|