|
Armeg Diamond Core Bits Set - 6mm, 7mm & 8mm
Ref: AR-PTC3CRMSET
Armeg PTC small diameter diamond core drill bit set. Featuring Armeg's three most popular diamond drill bit sizes. To be used with the AR-PTCWFKIT water feed pump (see related products below).
Includes:
- 6mm, 7mm & 8mm diamond core drill bits.
- 6mm, 7mm & 8mm pro masonry drill bits (for drilling fixing holes in substrate behind the tile).
- Water feed pipe.
- Water feed adaptor.
- Drive guides (sticky pads) - pack of 25.
- Carry case.
Features of Armeg PTC diamond tile drill bits...
- Thin wall, continuous diamond crowns for fast, efficient cutting and extended life. Not to be confused with short-life diamond grit alternatives.
- Capable of cutting hundreds of holes in all grades of porcelain.
- With natural depth stop.
- Needs a constant flow of water at the tip through the entire drilling process.
- Can also be used in marble, granite, travertine, natural slate, quarry tiles, ceramic tiles, natural stone, limestone, etc.
Frequently Asked Questions...
What speed should the drill bits be used at?
The diamond crowns can be used at any speed up to a maximum of 1500 rpm. Also suitable for use with cordless electric drills.
How quickly should I be able to produce a hole through a porcelain tile?
A hole should be produced through a porcelain tile in seconds rather than minutes. Excessive drilling times are usually due to insufficient pressure being applied through the drilling process or incorrect speed setting on the power tool.
How much pressure should I apply whilst drilling?
Sufficient pressure should be applied to keep the drill bit progressing through the tile (signified by tile dust being visible in the cooling water).
Estimated delivery (working days): 1-2 days
Price:
£129.95
(Ex VAT)
Return to... Porcelain Drill Bits - Armeg Diamond Core
|